RTA Embedded Pole 
Height—8' to 30'; Shaft—The shaft shall be spun tapered from all new seamless 6063 alloy aluminum tubing and shall be heat treated to produce a T6 temper. Each shaft shall have a minimum of 6" straight length at the top. Top straight section serves as a slipfitter for a luminaire or for the hub of the appropriate Valmont bracket or tapered arm. Alternatively, the straight section may be drilled for mounting luminaires. The shaft shall be cone tapered to the base diameter. All Valmont shafts shall be polished with fine grain aluminum oxide cloths, resulting in a high quality circumferential satin brushed finish. After finishing, each pole shall be wrapped for protection in shipment.; Direct Embedment—Unless otherwise specified, the length of the embedded section of a 4" diameter shaft shall be 3', 5" and 6" shall be 4', 7" and 8" shall be 5'. A 1-1/2" diameter grommetted wire inlet hole located 1' 6" below grade shall be included. The embedded section of the pole shall be coated inside and outside with zinc rich paint.; Special Finishes—Natural anodize, duranodic, or painted finishes may be specified as an addition to the satin brushed finish, if required. All aluminum parts and accessories shall receive a finish similar to that specified.; Ground Lug—Each pole shall include a 5/16”-18 tapped provision for ground connector.; Handhole—Available as an option.; Anti-Rotation Device—Available as an option.
Spec Sheets
RTA 8 30 EMBDD POLE (SPC7073)B9L.PDF
Fixture Details
Family:
US
Features Benefits:
Height8' to 30'; ShaftThe shaft shall be spun tapered from all new seamless 6063 alloy aluminum tubing and shall be heat treated to produce a T6 temper. Each shaft shall have a minimum of 6" straight length at the top. Top straight section serves as a slipfitter for a luminaire or for the hub of the appropriate Valmont bracket or tapered arm. Alternatively, the straight section may be drilled for mounting luminaires. The shaft shall be cone tapered to the base diameter. All Valmont shafts shall be polished with fine grain aluminum oxide cloths, resulting in a high quality circumferential satin brushed finish. After finishing, each pole shall be wrapped for protection in shipment.; Direct EmbedmentUnless otherwise specified, the length of the embedded section of a 4" diameter shaft shall be 3', 5" and 6" shall be 4', 7" and 8" shall be 5'. A 1-1/2" diameter grommetted wire inlet hole located 1' 6" below grade shall be included. The embedded section of the pole shall be coated inside and outside with zinc rich paint.; Special FinishesNatural anodize, duranodic, or painted finishes may be specified as an addition to the satin brushed finish, if required. All aluminum parts and accessories shall receive a finish similar to that specified.; Ground LugEach pole shall include a 5/16-18 tapped provision for ground connector.; HandholeAvailable as an option.; Anti-Rotation DeviceAvailable as an option.
You must log in to add this fixture to a project!
