Denver, CO

303.573.0222

Colorado Springs, CO

719.266.0050

Boise, ID

208.629.1757

Bozeman, MT

406.500.7950

Select Your Territory / Region:    

Select Your Territory:    

DS200 Round Tapered Steel Pole 3-Bolt Add to wishlist

Height—10' to 20'; Pole—The pole shaft conforms to ASTM A595 Grade A with a constant linear taper of 0.14 in/ft.; Pole Top—The pole top is held to a 3.00" OD (±0.13") for external top mount luminaire and/or bracket. For internal top mount luminaire please consult factory. A removable pole cap is provided for poles receiving drilling patterns for side-mount luminaire arm assemblies.; Handhole—A covered handhole and grounding provision with hardware is provided.; Anchor Base—The anchor base (base plate) conforms to ASTM A36.; Anchor Bolts—Anchor bolts conform to ASTM F1554 Grade 55 and are provided with one hex nut, one acorn nut and two flat washers. Bolts have an “L” bend on one end and are galvanized a minimum of 12" on the threaded end.; Hardware—All structural fasteners are galvanized high strength carbon steel. All non-structural fasteners are galvanized or zinc-plated carbon steel or stainless steel.; Finish—Standard finishes are galvanized, prime painted or any of Valmont’s V-PRO™ Protection Systems. Additional finish options available upon request.

View All Valmont Structures Products

Spec Sheets

RTS DS200 3BLTANCHRBS SPC7208 0217LLK.PDF

Fixture Details

Family:

US

Features Benefits:

Height10' to 20'; PoleThe pole shaft conforms to ASTM A595 Grade A with a constant linear taper of 0.14 in/ft.; Pole TopThe pole top is held to a 3.00" OD (0.13") for external top mount luminaire and/or bracket. For internal top mount luminaire please consult factory. A removable pole cap is provided for poles receiving drilling patterns for side-mount luminaire arm assemblies.; HandholeA covered handhole and grounding provision with hardware is provided.; Anchor BaseThe anchor base (base plate) conforms to ASTM A36.; Anchor BoltsAnchor bolts conform to ASTM F1554 Grade 55 and are provided with one hex nut, one acorn nut and two flat washers. Bolts have an L bend on one end and are galvanized a minimum of 12" on the threaded end.; HardwareAll structural fasteners are galvanized high strength carbon steel. All non-structural fasteners are galvanized or zinc-plated carbon steel or stainless steel.; FinishStandard finishes are galvanized, prime painted or any of Valmonts V-PRO Protection Systems. Additional finish options available upon request.




You must log in to add this fixture to a project!


Manufacturer

Valmont Structures

✓ LED
× Quick Ship

Product Categories

- Poles

Scroll to Top